|
|
Post by fmxrider on Jul 26, 2007 15:56:29 GMT -6
looking at another pipe. wanting low- mid range deciding on an FMF fatty or gnarly, or a pro circuit platinum or platinum 2. OPINIONS PLEASE!!
|
|
|
|
Post by fmxrider on Jul 27, 2007 15:40:31 GMT -6
im starting to lean toward the platinum
|
|
|
|
Post by cyclepop on Jul 27, 2007 16:44:13 GMT -6
FMF Fatty Gold Series is the Bomb!  Even on an old school 2-smoker! |
|
|
|
Post by fmxrider on Jul 27, 2007 16:49:52 GMT -6
yea i like the fatty...does any one know anything about the quality of pro circuit?
|
|
|
|
Post by F.O.G. Racing on Jul 27, 2007 18:58:40 GMT -6
to my understanding the FMF enhances more hp on the bottom/mid throttle, where the ProCircuit enhances more on the top end throttle. a pipe and silencer are the best bolt on hp enhancer for the money. always a first choice.
FMF Fatty would be my choice.
i would have to believe that FMF and PC are the same top quality, for around the same cost.
alot also depends on what type/size of bike you are wanting to put this on, and what type of riding you do the most. ex: woods or mx
a reed valve may be another add on choice, such as a Boysen Rad Valve, if you still want more.
keep in mind you may need to re-jet the motor as a pipe and/or valve will lean it out.
|
|
|
|
Post by fmxrider on Jul 28, 2007 10:07:53 GMT -6
yea , I have been doin research on the pipes.....I pretty much only ride tight MX tracks that require low to mid range..and that require quick throttle response.... so im probly goin to invest in the PC platinum 2 pipe and the PC shorty silencer. I have already re- jetted the carb. and my reed valve is backordered until August:(
|
|
